Meriam Instrument 1500 SMART Especificaciones descargar pdf (Pagina 14)

The PIECAL 434 allows you to check, calibrate and measure

all of your current signal instruments in a 4-20 mA DC loop.

It can be used at any access point in your loop. You can

calibrate recorders, digital indicators, stroke valves or any

instruments that get their input from a 4-20 mA loop.

Quickly diagnose ground fault and current leakage.

Calibrate Milliamp Instruments

Source 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA. Read 0.000 to

24.000 mA & -25.00 to 125.00% of 4-20 mA. Read -99.99 to 99.99 V. Simulate

2-Wire Transmitter, Power & Read Transmitters. Menu Selectable 250 Ohm

resistor for HART compatibility.

Calibrate with Lab Accuracy

Accurate to ±(0.01% of Reading + 0.002 mA). PIECAL 434 is more accurate

than similar calibrators - within ±0.004 mA at 20 mA output!

Locate Loop Current Leakages (Ground Faults)

Automatic indication of Loop Current and Leakage Current. Measure

ground current leakage from faulty wiring, flooded conduit and corrosion

bridges. Leakage typically appears as a Zero Shift and helps you decide if

the transmitter needs calibration or if there is a problem in the loop

wiring.

Faster Calibrations

Three output EZ-CHECK switch, 2 speed EZ-DIAL, Stepping & Ramping.

Easy-to-Read Backlit Display

Easy viewing in dark locations.

PIE 434.......................................................................$995

includes rubber boot, custom carrying case, batteries,

calibration certificate, and test leads.

AC Adaptor 100-120v,60Hz............................................$60

NiMh Charger & 4 “AA” batteries 120v 60hz...............$80

The PIECAL 311 gives you an updated design while

maintaining the familiar, time proven ease of use of

similar calibrators. Get an RTD calibrator with more

digits (0.01° resolution), automatic stepping, backlit

display, a rubber boot and rugged switches. It is also

compatible with more instruments in the field.

Calibrate with Ease

Resolution to 0.1 °F & °C; Accurate to 0.2°.

Source and Read Multiple RTD Curves plus Ω

Platinum 100 Ω: 1.3850, 1.3902, 1.3926, Platinum 1000 Ω: 1.3850, 1.3750,

Copper 10 & 50 Ω; Nickel 110 & 120 Ω; 0.00 to 4001.0 Ω, Custom ranges

available: consult factory.

Automatically Detect 2, 3, & 4 Wire Connections

Troubleshoot sensor connections & find broken wires with patented

technology.

Guaranteed Compatible with all Instrumentation

Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs,

Multi-channel Recorders and other pulsed excitation devices.

Faster Calibration

Instantly select three outputs with EZ-CHECK switch. Easily find trip

points with two speed EZ-DIAL knob & Automatic Stepping.

Additional Info

Double click to select RTD Type & °F & °C. Secondary display of Ω, Easy-to-

Read Display w/ backlight. Simple "No Tool" Battery Changes, Four

inexpensive "AA" batteries, Use in the Plant, Field or Shop.

PIE 434

Automated Diagnostic

4-20 mA Calibrator

PIE 311

Automated Universal

RTD Calibrator

DESCRIPTIONFEATURESMODELS / EXTRAS

PIE 311......................................................................$1,395

includes rubber boot, custom carrying case, batteries,

calibration certificate, and RTD Wire Kit.

Call us at 1-800-921-9494 or visit www.easthillsinstruments.com

™

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Comentarios a estos manuales

Sin comentarios

Meriam Instrument 1500 SMART Especificaciones Pagina 14

Comentarios a estos manuales